No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an ACL Port Pool

(Optional) Configuring an ACL Port Pool


In typical ACL usage scenarios, such as QoS traffic policy, a user may need to match multiple port numbers. To implement policy-based routing using advanced ACL rules to match multiple source and destination port numbers, the user needs to specify all possible combinations of source and destination port numbers when configuring ACL rules. On large-scale networks, tens of millions of ACL rules may need to be manually configured to match the port numbers, which is not viable.

To reduce the configuration workload, configure an ACL port pool. After an ACL port pool is configured, you only need to configure an ACL rule with a specified port pool name (pool-name) to match multiple port numbers.

When an ACL rule needs to match multiple source and destination port numbers, you need to configure this function twice to create an ACL source port pool and an ACL destination port pool separately.


  1. Run system-view

    The system view is displayed.

  2. Run acl port-pool pool-name

    An ACL port pool is created, and the ACL port pool view is displayed.

  3. Run any of the following commands:

    • eq begin-port-number
    • gt begin-port-number
    • lt end-port-number
    • range begin-port-number end-port-number

    Port numbers are added to the ACL port pool.

  4. Run commit

    The configuration is committed.

Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 28692

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next