No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying an ARP-Based ACL

Applying an ARP-Based ACL


An ACL is a set of rules that differentiate packets and determines whether packets are permitted and denied. After an ACL is applied to a service, the device processes the packets based on service requirements.


  • Apply an ARP-based ACL.

    An ACL can be applied to many features. For example, you can use an ARP-based ACL to classify ARP packets and perform traffic policing or traffic classification on the packets that match the ACL rules.


    ACLs can be applied to different features, and the devices with these features process the classified packets based on specific service requirements. For details about the features referencing ACLs, see the configuration guide of each feature.

Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 23340

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next