No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Local Authentication and Authorization Configuration

Verifying the Local Authentication and Authorization Configuration

Procedure

  • Run the display aaa configuration command to check the AAA summary.
  • Run the display aaa authentication-scheme [ authentication-scheme-name ] command to verify the authentication scheme configuration.
  • Run the display aaa authorization-scheme [ authorization-scheme-name ] command to verify the authorization scheme configuration.
  • Run the display aaa access-user [ domain domain-name | ip-address ip-address | ipv6-address ipv6-address | user-id userid | username user-name | self ] command to verify information about users who pass AAA authentication.
  • Run the display aaa domain [ domain-name ] command to verify the domain configuration.
  • Run the display aaa local-user [ domain domain-name | locked | self | service-type service-type-name | state { active | block } | user-group user-group-name | username user-name ] command to check the brief information about local users.
  • Run the display max-onlineusers command to check the historical maximum number of online users.
  • Run the display aaa abnormal-offline-record [ brief | domain-name domain-name | time start-time end-time | username user-name ] command to check abnormal logout records.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18807

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next