No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Mirroring Configuration

Verifying the Mirroring Configuration


  • Run the display observe-port command to check the observing port configuration.
  • Run the display port-mirroring command to check the port mirroring configuration.
  • Run the display traffic-mirroring [ verbose ] command to display the simplified traffic mirroring configuration.
  • Run the display traffic behavior [ behavior-name ] command to check the traffic behavior configuration.
  • Run the display traffic classifier [ classifier-name ] command to check the traffic classifier configuration.
  • Run the display traffic policy [ policy-name ] command to check the traffic policy configuration.
  • Run the display traffic-policy applied-record [ policy-name ] command to check the application record of a specified mirroring policy.
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 30445

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next