No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NETCONF Alarm List

NETCONF Alarm List

The following table lists the alarms supported by the NETCONF notification function. For details about how to subscribe to alarms, see Notification Capability implemented by Schema or Notification Capability implemented by YANG.

To learn about details about an alarm, click the alarm name.

Table 3-19 NETCONF alarm list

Alarm Name

Name Space

Meaning

Alarm ID

hwCPUUtilizationRisingAlarm

http://www.huawei.com/netconf/vrp/huawei-sem

CPU usage was sampled for a period of time. In one sampling period (overload times x sampling interval), if each CPU usage sample exceeded the pre-set overload threshold, this alarm was generated.

0x00010084

hwCPUUtilizationResume

http://www.huawei.com/netconf/vrp/huawei-sem

CPU usage was sampled for a period of time. In one sampling period (overload times x sampling interval), if every sampled CPU usage is below the pre-set clear threshold, this alarm was generated.

0x00010084

hwStorageUtilizationRisingAlarm

http://www.huawei.com/netconf/vrp/huawei-sem

Memory or storage usage was sampled for a period of time. In one sampling period (overload times x sampling interval), if each memory or storage usage sample exceeded the pre-set overload threshold, this alarm was generated.

0x00010085

hwStorageUtilizationResume

http://www.huawei.com/netconf/vrp/huawei-sem

Memory or storage usage was sampled for a period of time. In one sampling period (overload times x sampling interval), if every sampled memory or storage space usage was below the pre-set clear threshold, this alarm was generated.

0x00010085

hwIfMonitorInputRateRising

http://www.huawei.com/netconf/vrp/huawei-devm

The percentage of the rate of incoming traffic to the total bandwidth on an interface exceeded the threshold.

0x081300ae

hwIfMonitorInputRateResume

http://www.huawei.com/netconf/vrp/huawei-devm

The percentage of the rate of incoming traffic to the total bandwidth on an interface fell below the threshold.

0x081300ae

hwIfMonitorOutputRateRising

http://www.huawei.com/netconf/vrp/huawei-devm

The percentage of the rate of outgoing traffic to the total bandwidth on an interface exceeded the threshold.

0x081300af

hwIfMonitorOutputRateResume

http://www.huawei.com/netconf/vrp/huawei-devm

The percentage of the rate of outgoing traffic to the total bandwidth on an interface fell below the threshold.

0x081300af

hwXQOSQueueBufferOverrunAlarm

http://www.huawei.com/netconf/vrp/huawei-qos

The queue buffer exceeds the configured threshold.

0x09622003

hwXQOSQueueBufferOverrunResume

http://www.huawei.com/netconf/vrp/huawei-qos

The queue buffer is restored.

0x09622003

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 21012

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next