No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NetStream Configuration

NetStream Configuration

This chapter describes how to configure NetStream to collect and export flow statistics. It also describes how to allow fine-grained management, such as department-based charging for enterprises and traffic monitoring and analysis.

NOTE:

In compliance with IETF RFC3954, Huawei NetStream analyzes the communications information of end users. Before enabling this function, ensure that it is performed within the boundaries permitted by applicable laws and regulations. Effective measures must be taken to protect information confidentiality.

The CE12800E configured with ED-E, EG-E, and EGA-E series cards does not support NetStream Top Talkers.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 20855

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next