No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Starting the NetStream Top Talkers Function

Starting the NetStream Top Talkers Function

Context

After a NetStream Top Talkers template is applied to an interface, the NetStream Top Talkers function must be started using a command; otherwise, the function will not take effect. The NetStream Top Talkers function can be started in either of the following ways:
  • Scheduled start: The NetStream Top Talkers function is started at a specified time point.
  • Immediate start.

Procedure

  • Perform the following operations to schedule the start of the NetStream Top Talkers function implementation:
    1. Run the system-view command to enter the system view.
    2. Run the netstream top-talkers talker-name ip command to enter the NetStream Top Talkers template view.
    3. Run the starting time time date command to set the time when the NetStream Top Talkers function will be started.

      By default, the time when the NetStream Top Talkers function will be started is not set.

      NOTE:
      • The NetStream Top Talkers start time must be later than the system time; otherwise, the NetStream Top Talkers function cannot be started.

      • The NetStream Top Talkers function can be started at the specified time only when the NetStream Top Talkers template has been applied to an interface.

      • When the NetStream Top Talkers function has been started on an interface, the NetStream Top Talkers template applied to this interface can also be applied to another interface. In this situation, the traffic statistics on the later interface can only be collected in the remaining time.

      • If you run the netstream top-talkers ip starting command after the starting time time date command, the NetStream Top Talkers function is started immediately. When the specified time has been reached, collected traffic statistics are deleted, traffic is not sorted in order, and this function is restarted.

      • If you modify the NetStream Top Talkers template while the NetStream Top Talkers function is running, the NetStream Top Talkers function becomes invalid, collected traffic statistics are deleted, and traffic is not sorted in order.

    4. Run the commit command to commit the configuration.
  • Perform the following operations to start the NetStream Top Talkers function immediately:

    Run the netstream top-talkers talker-name ip starting command to start the NetStream Top Talkers function.

    By default, the NetStream Top Talkers function is not started.

    NOTE:
    • The NetStream Top Talkers function can be immediately started only when the NetStream Top Talkers template is applied to an interface.

    • When the NetStream Top Talkers function has been started on an interface, the NetStream Top Talkers template applied to this interface can also be applied to another interface. In this situation, the traffic statistics on the later interface can only be collected in the remaining time.

    • If you modify the NetStream Top Talkers template while the NetStream Top Talkers function is running, the NetStream Top Talkers function becomes invalid, collected traffic statistics are deleted, and traffic is not sorted in order.

    • If you restart the NetStream Top Talkers function while the NetStream Top Talkers function is running, the collected traffic statistics will be deleted, traffic will not be sorted in order, and the NetStream Top Talkers function will restart.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 28664

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next