No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Sampling Parameters of Micro-Burst Monitoring

(Optional) Configuring Sampling Parameters of Micro-Burst Monitoring

When Telemetry sampling and subscription based on micro-burst monitoring are created successfully, you can configure sampling parameters of micro-burst monitoring.

Context

Sampling parameters of micro-burst monitoring include the lower buffer threshold and sampling interval.

  • Lower buffer threshold:

    When either of the following conditions is met, the switch considers that a micro-burst occurs and records micro-burst information, including the micro-burst occurrence time and corresponding queue buffer usage:
    • The read queue buffer usage is higher than or equal to the configured lower threshold for the buffer usage, and the difference between the read queue buffer usage and the latest recorded queue buffer usage is larger than 2%.
    • The read queue buffer usage is higher than or equal to the configured lower threshold for the buffer usage, and the difference between the micro-burst occurrence time and the latest recorded micro-burst occurrence time exceeds 1s.
  • Sampling interval:

    • For CE12800 and CE12800E configured with FD-X series cards, the sampling interval of micro-burst monitoring is configured by specifying sample-interval in the sensor-group command.
    • For the CE12800E configured with ED-E, EG-E, and EGA-E series cards, the sampling interval of micro-burst monitoring is 2 ms.

Procedure

  1. Configure the Lower buffer threshold.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run qos [ queue queue-index ] buffer-monitoring percent low low-percent high high-percent

      The upper and lower buffer thresholds are configured.

      By default, the lower buffer threshold is 10% of the queue buffer space and the upper buffer threshold is 90% of the queue buffer space.

    4. Run commit

      The configuration is committed.

  2. Configure the Sampling interval.
    1. For CE12800 and CE12800E configured with FD-X series cards:

      1. Run system-view

        The system view is displayed.

      2. Run telemetry

        The Telemetry view is displayed.

      3. Run subscription subscription-name

        A subscription is created to associate the destination group and the sampling path, and the subscription view is displayed.

        By default, no subscription is created to associate the destination group and the sampling path.

      4. Run sensor-group sensor-name sample-interval sample-interval

        The sensor group is associated, and a sampling interval is configured for the sensor group.

        By default, no sampling interval is configured for the sampling sensor.

      5. Run commit

        The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 29100

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next