No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Packet Capture

Overview of Packet Capture

This function improves network maintenance efficiency and reduces maintenance costs. As Internet develops, devices on a network transmit various services, and network administrators often need to capture packets on devices to locate faults. The packet capturing function allows devices to capture received packets for fault location. This function simplifies the configurations of packet analysis device and network monitoring device.

After the packet capturing function is enabled, the devices capture the packets matching certain conditions. The maintenance personnel can run commands to view information about captured packets or save the captured packets to the local storage media as *.cap files. The saved files can be downloaded for fault analysis. This function greatly improves maintenance efficiency and reduces maintenance costs.

The CE12800 and CE12800E series switches can capture the following two types of packets:
  • Forwarded packets: If the device fails to forward traffic correctly, for example, the traffic does not match the traffic model, configure the packet capture function to capture forwarded packets for analysis. This allows the device to process invalid packets in time, ensuring that network data can be transmitted correctly.
  • Packets sent to the CPU: When a CPU fault occurs, such as the CPU usage is high, configure the packet capture function to capture packets sent to the CPU for analysis. This allows the device to process invalid packets in time, ensuring that the CPU works properly.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 20968

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next