No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for SNMP

Default Settings for SNMP

Table 1-6 lists the default settings of SNMP.
Table 1-6 Default settings for SNMP

Parameter

Default Setting

SNMP agent

Disabled

SNMP trap receive host

None

SNMP version

SNMPv3

SNMPv3 authentication and encryption

No authentication and no encryption

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 30016

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next