No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Flexible Flow Statistics Template

Configuring a Flexible Flow Statistics Template

Context

You need to configure a flexible flow statistics template before applying it to an interface. To obtain more detailed flow statistics, you can configure whether flexible flow statistics contain the number of packets and bytes, and the indexes of inbound and outbound interfaces.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the netstream record record-name vxlan inner-ip command to create a VXLAN flexible flow statistics template and enter its view.
  3. (Optional) Run the description description-information command to configure a description for the VXLAN flexible flow.

    By default, a VXLAN flexible flow does not have a description.

  4. Run the match inner-ip { destination-address | destination-port | tos | protocol | source-address | source-port | source-mac | destination-mac | cvlan } command to configure aggregation keywords for the VXLAN flexible flow statistics template.

    By default, no aggregation keyword is configured in a VXLAN flexible flow statistics template. If you run the command multiple times, multiple keywords are configured to aggregate the flows according to all these keywords.

    NOTE:

    Only the CE12800 supports the source-mac, destination-mac, and cvlan parameters.

  5. Run the collect counter { bytes | packets } command to add the number of packets and bytes to the flexible flow statistics exported to the NSC.

    By default, the flexible flow statistics that are exported to the NSC do not contain the number of packets or bytes.

  6. (Optional) Run the collect interface { input | output } command to add the indexes of the inbound and outbound interfaces to the flexible flow statistics exported to the NSC.

    By default, the flexible flow statistics exported to the NSC do not contain the index of the inbound or outbound interface.

  7. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 20381

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next