No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the NETCONF Configuration

Verifying the NETCONF Configuration

Background

After NETCONF is configured to allow the NMS to remotely manage configuration of devices, you can view detailed SSH session information (indicating that the NETCONF manager has logged in to the NETCONF agent), and the capabilities that the NETCONF agent supports.

Procedure

  • Run the display netconf session command to view information about NETCONF active sessions.
  • Run the display ssh user-information [ username ] command on the SSH server (NETCONF agent) to check information about the SSH user on the NETCONF client.
  • Run the display ssh server status command on the SSH server to check its global configuration.
  • Run the display ssh server session command on the SSH server to check information about sessions between the SSH server and the SSH client (NETCONF manager).
  • Run the display netconf capability command to view the NETCONF capabilities supported by the device.
  • Run the display netconf authorization { task-group-rules task-group-name | user-group-rules user-group-name } [ rule-name rule-name ] command to check the NETCONF authorization information.
  • Run the display netconf authorization statistics command to display the NETCONF authorization information.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 28977

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next