No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP Configuration

SNMP Configuration

This chapter describes how to configure the Simple Network Management Protocol (SNMP) to manage network elements.

Context

The Simple Network Management Protocol (SNMP) is a standard network management protocol widely used on TCP/IP networks. The SNMP framework manages network elements using a central computer, known as a network management station (NMS), on which network management software is installed. There are three SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. An SNMP system can run one or more SNMP versions.

NOTE:
  • SNMPv1 and SNMPv2c lack of authentication capabilities, resulting in vulnerability to security threats. When security is a concern, SNMPv3 is recommended.

  • After an NMS accesses a device from the admin-VS through SNMP, the NMS can access non-admin-VSs by carrying the VSID in the community (SNMPv1/v2c) or context (SNMPv3) field of packets. If the NMS accesses a non-admin-VS from the admin-VS, the NMS is authenticated only in the non-admin-VS. For example, if community is set to public123 for the admin-VS, the NMS can use public123@vs=1 (1 indicates the VSID) to access VS1.
  • An NMS cannot access a non-admin-VS from another non-admin-VS.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 19852

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next