No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IPv6 Aggregation Flow Statistics Export

Configuring IPv6 Aggregation Flow Statistics Export

After the IPv6 aggregation flow statistics export is configured, the NDE aggregates statistics about IPv6 flows with the same aggregation entries and exports flow statistics to the NetStream server for further analysis.

Pre-configuration Tasks

Before configuring the IPv6 aggregation flow statistics export, complete the following tasks:

  • Set the physical parameters of interfaces
  • Configure link layer attributes for interfaces

Configuration Process

The configuration tasks are mandatory and can be performed in any sequence. The function takes effect only when all configuration tasks are completed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 29893

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next