No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Flexible Flow Statistics Template

Configuring a Flexible Flow Statistics Template

Context

You must configure a flexible flow statistics template before applying it to an interface. To obtain more detailed flow statistics, you can configure whether flexible flow statistics contain the number of packets and bytes, and the indexes of the inbound and outbound interfaces.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the netstream record record-name ipv6 command to create an IPv6 flexible flow statistics template and enter the template view.
  3. (Optional) Run the description description-information command to configure the description of IPv6 flexible flows.

    By default, the description of IPv6 flexible flows is not configured.

  4. Run the match ipv6 { destination-address | destination-port | tos | flow-label | protocol | source-address | source-port } command to configure the aggregation keywords for the flexible IPv6 flow statistics template.

    By default, no aggregation keyword is configured in a flexible IPv6 flow statistics template. If you run the command multiple times, multiple keywords are configured to aggregate the flows according to all these keywords.

  5. Run the collect counter { bytes | packets } command to add the number of packets and bytes to the flexible flow statistics exported to the NSC.

    By default, the flexible flow statistics that are exported to the NSC do not contain the number of packets or bytes.

  6. (Optional) Run the collect interface { input | output } command to add indexes of the inbound and outbound interfaces to the flexible flow statistics exported to the NSC.

    By default, the flexible flow statistics exported to the NSC do not contain the index of the inbound or outbound interface.

  7. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 29999

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next