No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for OpenFlow

Application Scenarios for OpenFlow

Application Scenario for OpenFlow in VXLAN

SwitchA and SwitchB in Figure 5-6 are OpenFlow-compatible switches. The AC sets up OpenFlow and NETCONF connections with SwitchA and SwitchB respectively. The AC sends required information to SwitchA and SwitchB using the NETCONF protocol, and then SwitchA and SwitchB set up a VXLAN tunnel. The AC delivers all VXLAN-related entries to SwitchA and SwitchB. These entries contain the IP addresses and MAC addresses of the host. After receiving the entries, SwitchA and SwitchB computes the ARP entries to direct packet forwarding in the VXLAN tunnel.

Figure 5-6 Application scenario for OpenFlow in VXLAN
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 30515

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next