No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring AAA Local User

Configuring AAA Local User

Context

SNMPv3 supports authentication using AAA local users. Before configuring an SNMPv3 local user, ensure that the AAA local user exists and the user has been added to a user group.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Configure an AAA local user.
    1. Run aaa

      The AAA view is displayed.

    2. Run local-user user-name password [ irreversible-cipher irreversible-cipher-password ]

      A local user is created and a login password is configured for the user.

      By default, no local user exists in the system.

      NOTE:

      The value of user-name must be smaller than or equivalent to 32; otherwise, the user cannot be configured as an SNMPv3 local user.

    3. Run local-user user-name service-type snmp

      The access type of the local user is set to SNMP.

      By default, the access type of a local user is not set.

    4. Run local-user user-name level level

      The local user level is set.

      The user level must be set to 3 or higher. Otherwise, the SNMP connection cannot be established.

  3. Configure an AAA user group and add the local user to the user group.
    1. Run user-group user-group-name

      A user group is created and the user group view is displayed.

      By default, no local user group exists in the system.

      You can configure a task group and add the task group to the user group. In this situation, the MIB objects can associate with different tasks, and MIB objects can be authorized. For the configuration of AAA local authorization, see AAA Configuration > Configuring Local Authentication and Authorization > Configuring AAA Scheme in the CloudEngine 12800 and 12800E Series Switches Configuration Guide - Security.

    2. Run quit

      Return to the AAA view.

    3. Run local-user user-name user-group user-group-name

      The local user is added to a user group.

      A user group can be referenced by multiple local users, but a local user only belongs to one user group.

    4. Run quit

      Return to the system view.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 19817

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next