No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding Mirroring

Understanding Mirroring

Concepts

  • Mirrored port

    A mirrored port is a monitored port on which all the packets or packets matching traffic classification rules are copied to an observing port.

  • Observing port

    An observing port is connected to a monitoring device and transmits the packets copied from a mirrored port to the monitoring device.

  • Observing port group

    An observing port group consists of member ports connected to different monitoring devices. When an observing port group is configured for packet mirroring, packets mirrored to the observing port group are copied to all the member ports of the port group.

Port Mirroring

Packets passing through a mirrored port are copied and then sent to a specified observing port for analysis and monitoring, as shown in Figure 8-1.

Figure 8-1 Networking diagram of port mirroring

Port mirroring can be performed for packets in the following directions:
  • Inbound: mirroring the packets that are received by the mirrored port.

  • Outbound: mirroring the packets that are sent by the mirrored port.

  • Bidirectional: mirroring the packets that are received and sent by the mirrored port.

Traffic Mirroring

Traffic mirroring is used to copy specified packets passing through a mirrored port to an observing port for analysis and monitoring. In traffic mirroring, a traffic policy containing a traffic mirroring behavior is applied to a mirrored port. If packets passing through a mirrored port match traffic classification rules, the packets are copied to an observing port, as shown in Figure 8-2.

Figure 8-2 Schematic diagram of traffic mirroring

VLAN Mirroring

VLAN mirroring is used to copy packets on all active ports in a specified VLAN to an observing port. Users can monitor packets in one or more VLANs.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 30583

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next