No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Sampling Paths That Telemetry Supports

Sampling Paths That Telemetry Supports

This section describes the sampling sensor paths that Telemetry supports certain data collection.

Table 17-5 lists the sampling paths supported by Telemetry.

NOTE:

The current device supports a maximum of five collection conditions. When you query a subnode, the conditions of the parent node must be complete. You can select one or more conditions of the subnode or do not select them as required.

Table 17-5 Sampling paths supported by Telemetry

Sampling Path Type

Sampling Path

Data to Be Sampled

Collection Mode

Collection Condition and Example

Minimum Sampling Precision (ms)

YANG File

GPB Encoding File

Whether JSON Encoding Is Supported

Alarm

huawei-sem:hwCPUUtilizationRisingAlarm

High CPU usage alarm.

-

-

-

huawei-sem.yang

huawei-sem.proto

No

huawei-sem:hwCPUUtilizationResume

CPU usage clear alarm.

-

-

-

No

huawei-sem:hwStorageUtilizationRisingAlarm

High memory usage alarm.

-

-

-

No

huawei-sem:hwStorageUtilizationResume

Memory usage clear alarm.

-

-

-

No

Sampling

huawei-fibstatus:fibstatus/ipRouteEntryCounts/ipRouteEntryCount

FIBv4 used number.

Full collection

-

10000

huawei-fibstatus.yang

huawei-fibstatus.proto

No

huawei-fibstatus:fibstatus/ipRouteResources/ipRouteResource

FIBv4 max number.

Full collection

-

10000

No

huawei-fibstatus:fibstatus/ipv6RouteEntryCounts/ipv6RouteEntryCount

FIBv6 used number.

Full collection

-

10000

No

huawei-fibstatus:fibstatus/ipv6RouteResources/ipv6RouteResource

FIBv6 total number.

Full collection

-

10000

No

huawei-devm:devm/cpuInfos/cpuInfo

CPU information.

Full collection

-

10000

huawei-devm.yang

huawei-devm.proto

No

huawei-devm:devm/memoryInfos/memoryInfo

Memory information.

Full collection

-

10000

No

huawei-devm:devm/ports/port/opticalInfo

Information about the optical module connected to the interface.

Full collection or conditional collection

Collection condition:position

Example: huawei-devm:devm/ports/port[position="10GE1/0/1"]/opticalInfo

30000

No

huawei-mac:mac/bdMacTotalNumbers/bdMacTotalNumber

Total number of BD MAC addresses.

Full collection or conditional collection

Collection condition: bdId

Example: huawei-mac:mac/bdMacTotalNumbers/bdMacTotalNumber[bdId="2018"]

10000

huawei-mac.yang

huawei-mac.proto

No

huawei-mac:mac/macAddrSummarys/macAddrSummary

MAC address statistics.

Full collection or conditional collection

Collection condition: slotId

Example: huawei-mac:mac/macAddrSummarys/macAddrSummary[slotId="1"]

10000

No

huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel

NOTE:

Only the CE12800 supports this sampling path.

RSVP-TE tunnels' status information.

Full collection or conditional collection

Collection condition: tunnelName

Example: huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel[tunnelName="Tunnel1"]

10000

huawei-mpls-te.yang

huawei-mpls.proto

No

huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel/lsps/Lsp

NOTE:

Only the CE12800 supports this sampling path.

RSVP-TE LSPs' status information.

Full collection or conditional collection

Collection condition: tunnelName;mplsTunnelIngressLSRId;mplsTunnelEgressLSRId;mplsSessionID;mplsTunnelInstance

Example: huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel[tunnelName="Tunnel1"] /lsps/Lsp[mplsTunnelIngressLSRId="1.1.1.1", mplsTunnelEgressLSRId="2.2.2.2", mplsSessionID="2", mplsTunnelInstance="2"]

10000

No

huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel/lsps/Lsp/mplsTunnelARHops/mplsTunnelARHop

NOTE:

Only the CE12800 supports this sampling path.

RSVP-TE LSPs' information.

Full collection or conditional collection

Collection condition: tunnelName;mplsTunnelIngressLSRId;mplsTunnelEgressLSRId;mplsSessionID;mplsTunnelInstance

Example: huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel[tunnelName="Tunnel1"] /lsps/Lsp[mplsTunnelIngressLSRId="1.1.1.1", mplsTunnelEgressLSRId="2.2.2.2", mplsSessionID="2", mplsTunnelInstance="2"]/mplsTunnelARHops/mplsTunnelARHop

10000

No

huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel

NOTE:

Only the CE12800 supports this sampling path.

SR-TE tunnels' status information.

Full collection or conditional collection

Collection condition: tunnelName

Example: huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel[tunnelName="Tunnel1"]

10000

No

huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel/srTeTnlLsps/srTeTnlLsp

NOTE:

Only the CE12800 supports this sampling path.

SR-TE LSPs' status information.

Full collection or conditional collection

Collection condition: tunnelName;mplsTunnelIngressLSRId;mplsTunnelEgressLSRId;mplsSessionID;lspId

Example: huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel[tunnelName="Tunnel1"]/srTeTnlLsps/srTeTnlLsp[mplsTunnelIngressLSRId="1.1.1.1",mplsTunnelEgressLSRId="2.2.2.2", mplsSessionID="3",lspId="4"]

10000

No

huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel/srTeTnlLsps/srTeTnlLsp/mplsSrteCHops/MplsSrteCHop

NOTE:

Only the CE12800 supports this sampling path.

SR-TE LSPs' label stack information.

Full collection or conditional collection

Collection condition: tunnelName;mplsTunnelIngressLSRId;mplsTunnelEgressLSRId;mplsSessionID;lspId

Example: huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel[tunnelName="Tunnel1"]/srTeTnlLsps/srTeTnlLsp[mplsTunnelIngressLSRId="1.1.1.1",mplsTunnelEgressLSRId="2.2.2.2", mplsSessionID="3",lspId="4"]/mplsSrteCHops/MplsSrteCHop

10000

No

huawei-mpls:mpls/mplsTe/teBfdSessions/teBfdSession

NOTE:

Only the CE12800 supports this sampling path.

TE tunnels' BFD session status information.

Full collection or conditional collection

Collection condition: fecAddr;nextHop;bfdDiscriminator

Example: huawei-mpls:mpls/mplsTe/teBfdSessions/teBfdSession[fecAddr="2.2.2.2",nextHop="1.1.1.1",bfdDiscriminator="413"]

10000

No

huawei-ifm:ifm/interfaces/interface/ifStatistics

Interface statistics.

Full collection or conditional collection

Collection condition: ifName

Example: huawei-ifm:ifm/interfaces/interface[ifName="10GE1/0/1"]/ifStatistics

1000

huawei-ifm.yang

huawei-ifm.proto

No

huawei-qos:qos/qosPortBufUsageStats/qosPortBufUsageStat

Interface buffer usage.

Full collection or conditional collection

Collection condition: slotId;ifName

Example: huawei-qos:qos/qosPortBufUsageStats/qosPortBufUsageStat[slotId="1",ifName="10GE1/0/1"]

  • CE12800 and CE12800E equipped with FD-X series cards: 100
  • CE12800E equipped with ED-E, EG-E, and EGA-E series cards: 2

huawei-qos.yang

huawei-qos.proto

Yes

huawei-qos:qos/qosQueueBufUsageStats/qosQueueBufUsageStat

Queue buffer usage.

Full collection or conditional collection

Collection condition: slotId;ifName;queueId

Example: huawei-qos:qos/qosQueueBufUsageStats/qosQueueBufUsageStat[slotId="1",ifName="10GE1/0/1",queueId="0"]

  • CE12800 and CE12800E equipped with FD-X series cards: 100
  • CE12800E equipped with ED-E, EG-E, and EGA-E series cards: 2

Yes

huawei-qos:qos/qosCoreQueBufStats/qosCoreQueBufStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

Chip buffer usage.

Full collection

-

100

Yes

huawei-qos:qos/qosQueueDropStats/qosQueueDropStat

Statistics on packets discarded in a queue.

Full collection or conditional collection

Collection condition: slotId;ifName

Example: huawei-qos:qos/qosQueueDropStats/qosQueueDropStat[slotId="1",ifName="10GE1/0/1"]

  • CE12800 and CE12800E equipped with FD-X series cards: 100
  • CE12800E equipped with ED-E, EG-E, and EGA-E series cards: 2

Yes

huawei-qos:qos/qosIngPortDropStats/qosIngPortDropStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

Statistics on packets discarded in the inbound direction of an interface.

Full collection or conditional collection

Collection condition: ifName

Example: huawei-qos:qos/qosIngPortDropStats/qosIngPortDropStat[ifName="10GE1/0/1"]

100

Yes

huawei-qos:qos/qosIngPortQueBufStats/qosIngPortQueBufStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

Inbound queue buffer usage.

Full collection or conditional collection

Collection condition: slotId;ifName;queueId

Example: huawei-qos:qos/qosIngPortQueBufStats/qosIngPortQueBufStat[slotId="1",ifName="10GE1/0/1",queueId="0"]

100

Yes

huawei-qos:qos/qosPortPfcStats/qosPortPfcStat

NOTE:

The CE12800E equipped with ED-E, EG-E, and EGA-E series cards does not support this sampling path.

Statistics on PFC frames on an interface.

Full collection or conditional collection

Collection condition: ifName

Example: huawei-qos:qos/qosPortPfcStats/qosPortPfcStat[ifName="10GE1/0/1"]

100

Yes

huawei-qos:qos/qosGlobalCfgs/qosCaptureDropstats/qosCaptureDropstat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

Information about the captured discarded packets.

Full collection

-

10000

Yes

huawei-qos:qos/qosQueueHdrmStats/qosQueueHdrmStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

Queue headroom buffer usage.

Full collection or conditional collection

Collection condition: ifName;queueId

Example: huawei-qos:qos/qosQueueHdrmStats/qosQueueHdrmStat[ifName="10GE1/0/1",queueId="0"]

100

Yes

huawei-qos:qos/qosPortEcnStats/qosPortEcnStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

Port-based ECN statistics.

Full collection or conditional collection

Collection condition: slotId;ifName

Example: huawei-qos:qos/qosPortEcnStats/qosPortEcnStat[slotId="1",ifName="10GE1/0/1"]

100

Yes

huawei-qos:qos/qosAclResourceUsageStats/qosAclResourceUsageStat

ACL resource usage.

Full collection

-

10000

No

huawei-qos:qos/qosBankResourceUsageStats/qosBankResourceUsageStat

Bank resource usage.

Full collection

-

10000

No

openconfig-interfaces:interfaces/interface/subinterfaces/subinterface/state/counters

NOTE:

The CE12800E equipped with the ED-E, EG-E, and EGA-E series cards does not support this sampling path.

Layer 2 sub-interface statistics.

Full collection

-

1000

openconfig-interfaces.yang

openconfig-interfaces.proto

No

openconfig-interfaces:interfaces/interface/state/counters

Physical interface statistics.

Full collection or conditional collection

Collection condition: name

Example: openconfig-interfaces:interfaces/interface[name="10GEGE1/0/1"]/state/counters

1000

No

Table 17-6 lists the detailed sampling indicators of sampling paths.

Table 17-6 Detailed sampling indicators of sampling paths

Sampling Path

Node on the Sampling Path

Data Indicator to Be Collected

Whether a Customized Threshold Is Supported

huawei-fibstatus:fibstatus/ipRouteEntryCounts/ipRouteEntryCount

slot

Slot ID.

No

vpnName

VPN instance name.

No

entryCount

IPv4 route used number.

Yes

huawei-fibstatus:fibstatus/ipRouteResources/ipRouteResource

slot

Slot ID.

No

total

IPv4 fib total number.

Yes

used

IPv4 route used total number.

Yes

huawei-fibstatus:fibstatus/ipv6RouteEntryCounts/ipv6RouteEntryCount

slot

Slot ID.

No

vpnName

VPN instance name.

No

entryCount

IPv6 route used number.

Yes

huawei-fibstatus:fibstatus/ipv6RouteResources/ipv6RouteResource

slot

Slot ID.

No

total

The max number of IPv6 routes.

Yes

totalMask64

The max number of IPv6 network routes.

Yes

totalMask65To127

The max number of IPv6 longer-mask routes.

Yes

totalMask128

The max number of IPv6 host routes.

Yes

used

IPv6 route used total number.

Yes

huawei-devm:devm/cpuInfos/cpuInfo

position

Board location information.

No

entIndex

Board index information.

Yes

systemCpuUsage

CPU usage information, in percentage.

Yes

ovloadThreshold

Overload threshold information, in percentage.

Yes

unovloadThreshold

Overload recovery threshold information, in percentage.

Yes

interval

CPU overload detection interval information, in minutes.

Yes

huawei-devm:devm/memoryInfos/memoryInfo

position

Board location information.

No

entIndex

Board index information.

Yes

osMemoryTotal

Total system memory, in KB.

Yes

osMemoryUse

System memory used, in KB.

Yes

osMemoryFree

System memory left, in KB.

Yes

osMemoryUsage

System memory usage, in percentage.

Yes

doMemoryTotal

Total memory of the Versatile Routing Platform, in KB.

Yes

doMemoryUse

Memory used of the Versatile Routing Platform, in KB.

Yes

doMemoryFree

Memory left of the Versatile Routing Platform, in KB.

Yes

doMemoryUsage

Memory usage of the Versatile Routing Platform, in percentage.

Yes

simpleMemoryTotal

Total Simple memory, in KB.

Yes

simpleMemoryUse

Simple memory used, in KB.

Yes

simpleMemoryFree

Simple memory left, in KB.

Yes

simpleMemoryUsage

Simple memory usage, in percentage.

Yes

ovloadThreshold

Overload threshold, in percentage.

Yes

unovloadThreshold

Overload recovery threshold, in percentage.

Yes

huawei-devm:devm/ports/port/opticalInfo

biasCurrent

Bias current of the optical module.

No

manuDate

Manufacturing date of the optical module.

No

position

Name of the interface on which the optical module is installed.

No

rxPower

Receive power of the optical module.

No

temperature

Temperature of the optical module.

No

txPower

Transmit power of the optical module.

No

voltage

Voltage of the optical module.

No

huawei-mac:mac/bdMacTotalNumbers/bdMacTotalNumber

bdId

BD ID.

Yes

number

Total number of MAC addresses.

Yes

huawei-mac:mac/macAddrSummarys/macAddrSummary

slotId

Slot ID.

No

totalNum

Total number of MAC addresses.

Yes

blackholeNum

Number of blackhole MAC addresses.

Yes

staticNum

Number of static MAC addresses.

Yes

dynLocalNum

Total number of MAC address entries learned by the local board.

Yes

dynRemote

Total number of MAC address entries synchronized from other boards to the local board.

Yes

dynTrunk

Total number of dynamic MAC address entries learned by all trunk interfaces.

Yes

oamNum

Total number of OAM MAC address entries.

Yes

stickyNum

Total number of sticky MAC address entries.

Yes

securityNum

Total number of secure dynamic MAC address entries.

Yes

authenNum

Total number of authentication MAC address entries.

Yes

guestNum

Total number of MAC address entries learned by interfaces in the guest VLAN.

Yes

muxNum

Total number of MAC address entries learned by interfaces in the MUX VLAN.

Yes

tunnelNum

Total number of tunnel MAC address entries.

Yes

snoopingNum

Total number of snooping MAC address entries.

Yes

evnNum

Total number of EVN MAC address entries.

Yes

ovsdbNum

Total number of OVSDB MAC address entries.

Yes

capacity

MAC address table capacity.

Yes

huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel

NOTE:

Only the CE12800 supports this sampling path.

tunnelState

Tunnel status.

No

tunnelName

Tunnel name.

No

huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel/lsps/Lsp

NOTE:

Only the CE12800 supports this sampling path.

mplsTunnelIngressLSRId

LSR ID of the ingress.

No

mplsTunnelEgressLSRId

LSR ID of the egress.

No

mplsSessionID

Tunnel ID.

No

mplsTunnelInstance

LSP ID.

No

mplsTunnelOperStatus

Running status of the LSP.

No

huawei-mpls:mpls/mplsTe/rsvpTeTunnels/rsvpTeTunnel/lsps/Lsp/mplsTunnelARHops/mplsTunnelARHop

NOTE:

Only the CE12800 supports this sampling path.

mplsTunnelARHopIndex

Hop index of the route.

Yes

incommingType

Whether the hop IP address is the IP address of the inbound interface.

No

mplsTunnelARHopIpAddr

Hop IP address of the route.

No

mplsTunnelARHopLable

Hop label of the route.

Yes

huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel

NOTE:

Only the CE12800 supports this sampling path.

tunnelState

Tunnel status.

No

tunnelName

Tunnel name.

No

huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel/srTeTnlLsps/srTeTnlLsp

NOTE:

Only the CE12800 supports this sampling path.

mplsTunnelIngressLSRId

LSR ID of the ingress.

No

mplsTunnelEgressLSRId

LSR ID of the egress.

No

mplsSessionID

Tunnel ID.

No

lspId

LSP ID.

No

mplsTunnelOperStatus

Running status of the LSP.

No

huawei-mpls:mpls/mplsTe/srTeTunnels/srTeTunnel/srTeTnlLsps/srTeTnlLsp/mplsSrteCHops/MplsSrteCHop

NOTE:

Only the CE12800 supports this sampling path.

mplsTunnelCRHopIndex

Hop index of the route.

Yes

mplsTunnelCRHopType

Label type.

Yes

mplsTunnelCRHopLabel

Hop label of the route.

Yes

mplsTunnelCRHopLabelType

Node or adjacency ID.

Yes

mplsTunnelCRHopNAI

Hop type of the route.

No

huawei-mpls:mpls/mplsTe/teBfdSessions/teBfdSession

NOTE:

Only the CE12800 supports this sampling path.

bfdDiscriminator

BFD session discriminator of the TE tunnel.

Yes

bfdMinRxInterval

BFD receive interval.

Yes

bfdMinTxInterval

BFD transmit interval.

Yes

bfdState

BFD session status of the TE tunnel.

Yes

fecAddr

FEC of the TE tunnel.

No

localLspId

LSP ID of the TE tunnel.

No

lspIndex

LSP index of the TE tunnel.

Yes

nextHop

Next hop address of the TE tunnel.

No

outInterfaceName

Outbound interface of the TE tunnel.

No

sessionAge

Duration since the TE BFD session is set up.

Yes

sessionTunnelID

Session ID of the TE tunnel.

No

signalProtocol

Protocol type of the TE tunnel.

Yes

tunnelName

Name of the TE tunnel.

No

huawei-ifm:ifm/interfaces/interface/ifStatistics

sendByte

Number of correct bytes among sent ones, in Byte.

No

sendPacket

Number of correct unicast, multicast, and broadcast packets among sent ones.

No

sendMutiPacket

Number of correct multicast packets among sent ones.

No

sendBroadPacket

Number of correct broadcast packets among sent ones.

No

sendUniPacket

Number of correct unicast packets among sent ones.

No

receiveByte

Number of correct bytes received, in Byte.

No

receivePacket

Number of correct unicast, multicast, and broadcast packets among received ones.

No

rcvMutiPacket

Number of correct multicast packets among received ones.

No

rcvBroadPacket

Number of correct broadcast packets among received ones.

No

rcvUniPacket

Number of correct unicast packets among received ones.

No

rcvDropPacket

Number of dropped packets among received ones.

No

rcvErrorPacket

Number of error packets among received ones.

No

sendDropPacket

Number of dropped packets among sent ones.

No

sendErrorPacket

Number of error packets among sent ones.

No

huawei-qos:qos/qosPortBufUsageStats/qosPortBufUsageStat

currentUsed

Used buffer, in bytes.

No

ifName

Interface name.

No

peakUsed

Peak value of the used buffer, in bytes.

No

slotId

Slot ID.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosQueueBufUsageStats/qosQueueBufUsageStat

currentUsed

Used buffer, in bytes.

No

ifName

Interface name.

No

peakUsed

Peak value of the used buffer, in bytes.

No

queueId

Queue ID.

No

slotId

Slot ID.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosCoreQueBufStats/qosCoreQueBufStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

coreId

Forwarding core ID.

No

currentPercent

Usage of the shared buffer, which is calculated according to the following formula: Usage of the shared buffer = Shared buffer that is used/Total size of the shared buffer

No

currentUsedByte

Shared buffer that is used, in bytes.

No

currentUsedCell

Shared buffer that is used, in cells.

No

slotId

Slot ID.

No

totalBufByte

Total size of the shared buffer, in bytes.

No

totalBufCell

Total size of the shared buffer, in cells.

No

unitId

Chip ID.

No

huawei-qos:qos/qosQueueDropStats/qosQueueDropStat

ifName

Interface name.

No

queue0DropBytes

Number of discarded bytes in queue 0.

No

queue0DropPackets

Number of discarded packets in queue 0.

No

queue1DropBytes

Number of discarded bytes in queue 1.

No

queue1DropPackets

Number of discarded packets in queue 1.

No

queue2DropBytes

Number of discarded bytes in queue 2.

No

queue2DropPackets

Number of discarded packets in queue 2.

No

queue3DropBytes

Number of discarded bytes in queue 3.

No

queue3DropPackets

Number of discarded packets in queue 3.

No

queue4DropBytes

Number of discarded bytes in queue 4.

No

queue4DropPackets

Number of discarded packets in queue 4.

No

queue5DropBytes

Number of discarded bytes in queue 5.

No

queue5DropPackets

Number of discarded packets in queue 5.

No

queue6DropBytes

Number of discarded bytes in queue 6.

No

queue6DropPackets

Number of discarded packets in queue 6.

No

queue7DropBytes

Number of discarded bytes in queue 7.

No

queue7DropPackets

Number of discarded packets in queue 7.

No

slotId

Slot ID.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosIngPortDropStats/qosIngPortDropStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

dropBytes

Number of discarded bytes.

No

dropPackets

Number of discarded packets.

No

ifName

Interface name.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosIngPortQueBufStats/qosIngPortQueBufStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

currentGuarantee

Guaranteed buffer that has been used.

No

ifName

Interface name.

No

queueId

Queue ID.

No

slotId

Slot ID.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosPortPfcStats/qosPortPfcStat

NOTE:

The CE12800E equipped with ED-E, EG-E, and EGA-E series cards does not support this sampling path.

ifName

Interface name.

No

queue0DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 0.

No

queue0DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 0.

No

queue0ReceiveFrames

Number of received PFC frames in queue 0.

No

queue0TransmitFrames

Number of sent PFC frames in queue 0.

No

queue1DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 1.

No

queue1DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 1.

No

queue1ReceiveFrames

Number of received PFC frames in queue 1.

No

queue1TransmitFrames

Number of sent PFC frames in queue 1.

No

queue2DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 2.

No

queue2DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 2.

No

queue2ReceiveFrames

Number of received PFC frames in queue 2.

No

queue2TransmitFrames

Number of sent PFC frames in queue 2.

No

queue3DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 3.

No

queue3DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 3.

No

queue3ReceiveFrames

Number of received PFC frames in queue 3.

No

queue3TransmitFrames

Number of sent PFC frames in queue 3.

No

queue4DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 4.

No

queue4DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 4.

No

queue4ReceiveFrames

Number of received PFC frames in queue 4.

No

queue4TransmitFrames

Number of sent PFC frames in queue 4.

No

queue5DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 5.

No

queue5DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 5.

No

queue5ReceiveFrames

Number of received PFC frames in queue 5.

No

queue5TransmitFrames

Number of sent PFC frames in queue 5.

No

queue6DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 6.

No

queue6DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 6.

No

queue6ReceiveFrames

Number of received PFC frames in queue 6.

No

queue6TransmitFrames

Number of sent PFC frames in queue 6.

No

queue7DeadlockDetectNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of detected PFC deadlock times in queue 7.

No

queue7DeadlockRecoveryNum

NOTE:

Only the CE12800E equipped with FD-X series cards supports this node.

Number of PFC deadlock recovery times in queue 7.

No

queue7ReceiveFrames

Number of received PFC frames in queue 7.

No

queue7TransmitFrames

Number of sent PFC frames in queue 7.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosGlobalCfgs/qosCaptureDropstats/qosCaptureDropstat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

number

Index of a packet. When the value is 0xffffffff, the sampling information is invalid.

No

dropType

Type of discarded packets.
  • 1: packets discarded due to congestion
  • 2: packets discarded during forwarding

No

srcMac

Source MAC address of packets.

No

dstMac

Destination MAC address of packets.

No

dstPort

Destination port number of packets.

No

ethType

Ethernet type of packets.

No

protocol

Protocol type of packets.

No

srcIpv4

Source IPv4 address of packets.

No

dstIpv4

Destination IPv4 address of packets.

No

srcPort

Source port number of packets.

No

vlanId

VLAN ID of packets.

No

ifName

Source interface name of packets.

No

queueID

Queue ID of packets.

No

reason

Reason why packets are discarded.

No

timestamp

Time when packets are discarded.

No

huawei-qos:qos/qosQueueHdrmStats/qosQueueHdrmStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

currentUsed

Used buffer, in cells.

No

ifName

Interface name.

No

peakUsed

Peak value of the used buffer, in cells.

No

queueId

Queue ID.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosPortEcnStats/qosPortEcnStat

NOTE:

Only the CE12800E equipped with FD-X series cards supports this sampling path.

ifName

Interface name.

No

packets

Number of ECN packets.

No

slotId

Slot ID.

No

timestamp

Timestamp, in milliseconds.

No

huawei-qos:qos/qosAclResourceUsageStats/qosAclResourceUsageStat

aclTotal

Total number of ACL resources.

No

aclUsed

Number of used ACL resources.

No

chipId

Chip ID.

No

resourceName

Type of ACL resources.

No

slotId

Slot ID.

No

huawei-qos:qos/qosBankResourceUsageStats/qosBankResourceUsageStat

bankIdList

ID of a bank resource.

No

chipId

Chip ID.

No

entryFree

Number of remaining entries in the bank.

No

entryUsedList

Number of used entries in the bank.

No

slotId

Slot ID.

No

openconfig-interfaces:interfaces/interface/subinterfaces/subinterface/state/counters

NOTE:

The CE12800E equipped with the ED-E, EG-E, and EGA-E series cards does not support this sampling path.

in_octets

Number of received bytes.

No

in_unicast_pkts

Number of received packets.

No

in_broadcast_pkts

This field is not supported and is fixed as 0.

No

in_multicast_pkts

This field is not supported and is fixed as 0.

No

in_discards

This field is not supported and is fixed as 0.

No

in_errors

This field is not supported and is fixed as 0.

No

in_unknown_protos

This field is not supported and is fixed as 0.

No

in_fcs_errors

This field is not supported and is fixed as 0.

No

out_octets

Number of sent bytes.

No

out_unicast_pkts

Number of sent packets.

No

out_broadcast_pkts

This field is not supported and is fixed as 0.

No

out_multicast_pkts

This field is not supported and is fixed as 0.

No

out_discards

This field is not supported and is fixed as 0.

No

out_errors

This field is not supported and is fixed as 0.

No

carrier_transitions

This field is not supported and is fixed as 0.

No

last_clear

Latest clearance time, in nanoseconds.

No

openconfig-interfaces:interfaces/interface/state/counters

carrier_transitions

This field is not supported and is fixed as 0.

No

in_broadcast_pkts

Number of received broadcast packets.

No

in_discards

Number of received packets that are discarded.

No

in_errors

Number of received error packets.

No

in_fcs_errors

Number of received FCS-error packets.

No

in_multicast_pkts

Number of received multicast packets.

No

in_octets

Number of received bytes.

No

in_unicast_pkts

Number of received unicast packets.

No

in_unknown_protos

Number of received unknown packets.

No

last_clear

This field is not supported and is fixed as 0.

No

out_broadcast_pkts

Number of sent broadcast packets.

No

out_discards

Number of sent packets that are discarded.

No

out_errors

Number of sent error packets.

No

out_multicast_pkts

Number of sent multicast packets.

No

out_octets

Number of sent bytes.

No

out_unicast_pkts

Number of sent unicast packets.

No

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 28902

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next