No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Packet Trace

Licensing Requirements and Limitations for Packet Trace

Involved Network Elements

Other network elements are not required.

Licensing Requirements

Packet trace is a basic feature of a switch and is not under license control.

Version Requirements

Table 10-1 Products and minimum version supporting packet trace

Product Model

Minimum Version Required

CE12800E (configured with ED-E, EG-E, and EGA-E series cards) V200R005C10

Feature Limitations

The interfaces specified for receiving detection packets can only be GE, 10GE, 25GE, 40GE, and 100GE interfaces.

Packet trace can locate the packet drop reason. However, if packet drop is caused by congestion, packet trace may not accurately locate the reason because congestion is unexpected and occurs randomly.

Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 28906

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next