No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for LLDP

Licensing Requirements and Limitations for LLDP

Involved Network Elements

Other network elements are not required.

Licensing Requirements

LLDP is a basic feature of a switch and is not under license control.

Version Requirements

Table 6-4 Products and minimum version supporting LLDP
Product Model Minimum Version Required
CE12804/CE12808/CE12812 V100R001C00
CE12816 V100R003C00
CE12804S/CE12808S V100R005C00
CE12800E V200R002C50

Feature Limitations

The LLDP function can only be configured on physical interfaces. For an Eth-Trunk, you can only configure LLDP on its member interfaces.

Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 30528

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next