No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, sFlow, and NETCONF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NetStream Aggregation Flow Statistics Collection on an Interface

Enabling NetStream Aggregation Flow Statistics Collection on an Interface

Context

Aggregation flow statistics can be exported only when flow statistics collection has been enabled on an interface.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the interface interface-type interface-number command to enter the interface view.
  3. Run the netstream { inbound | outbound } ipv6 command to enable the NetStream function on the interface to collect statistics about IPv6 flows.

    By default, the NetStream function for IPv6 flows is disabled on the interface.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075344

Views: 20856

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next