No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
CloudEngine 12800 and 12800E V200R005C10 Configuration Guide - Security
This document describes the configurations of Security, including AAA, 802.1x Authentication, ACL, TCAM ACL Customization, local attack defense, Microsegmentation, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, MACsec, DHCP snooping, IPSG, URPF, SSL, Keychain and FIPS.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing DHCP Snooping Binding Entries
Clearing DHCP Snooping Binding Entries
Context
After the networking environment changes, DHCP snooping binding entries do not age immediately. The following information in DHCP snooping binding entries may change, causing packet forwarding failure:
VLAN to which a DHCP client belongs.
Interface to which DHCP clients are connected.
IPv4 address to which a DHCP client belongs.
BD to which the user belongs.
Before changing the networking environment, clear all DHCP snooping binding entries manually so that the device generates a new DHCP snooping binding table based on the new networking environment.
After the DHCP snooping binding entries are cleared, network communication can be recovered only after all the DHCP users connected to the device re-log in and new binding entries are generated. Exercise caution when you run the command.
Procedure
Run the reset user-bind dhcp snooping [ { vlanvlan-id | interfaceinterface-typeinterface-number } * | ip-addressip-address | bridge-domainbd-id ] command in the user view to clear DHCP snooping binding entries.