Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Attack Source Information
Context
Before collecting updated statistics on attack sources, run the following command in the user view to clear the existing statistics.
The cleared attack source information cannot be restored. Therefore, exercise caution when you perform this operation.
Procedure
- Run the reset auto-defend attack-source [ statistics ] [ slot slot-id ] command to clear information about the attack sources.
- Run the reset auto-defend attack-source trace-type { source-mac [ mac-address ] | source-ip [ ip-address | ipv6-address ] | source-portvlan [ interface interface-type interface-number vlan vlan-id [ inner-vlan inner-vlan-id ] ] } * [ slot slot-id ] command to clear statistics about attack source tracing based on the source MAC address, source IP address, or source port+VLAN.