Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Traffic Suppression and Storm Control
Table 9-2 and Table 9-3 list the default parameter settings for traffic suppression and storm control.
Table 9-2 Default settings for traffic suppression
Parameter |
Default Setting |
|---|---|
Traffic suppression on an interface |
Enabled |
Traffic suppression mode on an interface |
Percentage limit rate mode |
Percentage |
NOTE:
The percentage rate limit that takes effect is 100% for CE-L48GT-EA, CE-L48GT-EC, CE-L48GS-EA, CE-L48GS-EC, CE-L24XS-BA, CE-L24XS-EA, CE-L48XS-BA, CE-L48XS-EA and CE-L24LQ-EA cards. |
Blocking outgoing packets |
Disabled |
Traffic suppression in a VLAN |
Disabled |
Traffic suppression for Internet Control Message Protocol (ICMP) packets |
Enabled |
Traffic suppression threshold for ICMP Packets |
1500 pps |