Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Alarm Function of IP Packet Check
Context
You can enable the alarm function of IP packet check on the device. When the number of discarded IP packets reaches the alarm threshold, an alarm is generated.
Procedure
Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run ip source check user-bind alarm enable
Alarm function of IP packet check is enabled.
By default, the alarm function of IP packet check is disabled.
Run ip source check user-bind alarm threshold threshold
The alarm threshold for the number of discarded IP packets is set.
By default, the alarm threshold for the number of discarded IP packets is 100.
Run commit
The configuration is committed.