Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MFF in a VLAN
Procedure
- Run system-view
The system view is displayed.
- Run vlan vlan-id
The VLAN view is displayed.
- Run mac-forced-forwarding enable
MFF is enabled in the VLAN.
By default, MFF is disabled in a VLAN.
MFF cannot be enabled in a VLAN where the super-VLAN, sub-VLAN, multiplex (MUX) VLAN, VLANIF interface, ARP fast reply, or Egress ARP Inspection (EAI) is configured.
- Run commit
The configuration is committed.
