Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Storm Control
As shown in Figure 9-2, Switch A is connected to a Layer 2 network and a router. To limit the rates of broadcast packets, multicast packets, and unknown unicast packets forwarded by the Layer 2 network, configure storm control on the Layer 2 Ethernet interface 10GE1/0/1 of Switch A.