Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the ARP Flood Attack Defense Configuration
Procedure
- Run the display arp anti-attack { rate-limit | entry-check } command to check the ARP anti-attack configuration.
- Run the display arp miss anti-attack rate-limit command to check the ARP Miss anti-attack configuration.
- Run the display arp limit [ interface interface-type interface-number ] [ vlan vlan-id ] command to check the maximum number of ARP entries that an interface can learn.
- Run the display arp learning strict command to check strict ARP learning globally and on all interfaces.