Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Rate Limiting on the Management Interface
Context
If there is heavy traffic on the management interface due to attacks or network exceptions, the CPU of the device is overloaded, which affects system operations. You can configure a rate limit on the management interface to limit the rate of traffic entering the device through the management interface, ensuring normal system operations.
Procedure
- Run system-view
The system view is displayed.
- Run interface meth 0/0/0
The MEth interface view is displayed.
- Run qos lr pps packets
A rate limit is set for the management interface.
A small rate limit may affect the FTP, Telnet, SFTP, STelnet, and SSH functions.
- Run commit
The configuration is committed.
