Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MQC Configuration
Procedure
- Run the display traffic classifier [ classifier-name ] command to check the traffic classifier configuration.
- Run the display traffic behavior [ behavior-name ] command to check the traffic behavior configuration on the device.
Run the display traffic policy [ policy-name [ classifier classifier-name ] ] command to check the traffic policy configuration.
Run the display traffic-policy applied-record [ policy-name ] [ global [ slot slot-id ] | interface interface-type interface-number | vlan vlan-id | vsi vsi-name | vpn-instance vpn-instance-name | qos group group-id | bridge-domain bd-id ] [ inbound | outbound ] command to check the application records of a specified traffic policy.
The CE12800E does not support the vsi vsi-name parameter.
- Run the display system tcam fail-record [ slot slot-id ] command to display TCAM delivery failures.
- Run the display system tcam service brief [ slot slot-id ] command to display the group index and rule count occupied by different services.
- Run the display system tcam service { cpcar slot slot-id | service-name slot slot-id [ chip chip-id ] } command to display IDs of entries delivered by services on the specified chip or in the specified slot.
- Run one of the following commands to display data of a traffic policy that has been applied:
- display system tcam service traffic-policy { global | vlan vlan-id | interface interface-type interface-number | vsi vsi-name | vpn-instance vpn-instance-name | qos group group-id | bridge-domain bd-id } policy-name { inbound | outbound } [ slot slot-id [ chip chip-id ] ]
The CE12800E does not support the vsi vsi-name parameter.
- display system tcam service traffic-policy slot slot-id policy-name { inbound | outbound } [ chip chip-id ]
- display system tcam service traffic-policy { global | vlan vlan-id | interface interface-type interface-number | vsi vsi-name | vpn-instance vpn-instance-name | qos group group-id | bridge-domain bd-id } policy-name { inbound | outbound } [ slot slot-id [ chip chip-id ] ]
- (For the CE12800) Run the display system tcam match-rules slot slot-id [ [ ingress | egress | group group-id ] | [ chip chip-id ] ] * command to display matched entries.
- (For the CE12800E configured with FD-X series cards) Run the display system tcam match-rules slot slot-id [ [ ingress | egress | group group-id ] | [ delay-time time-value ] ] * command to display matched entries.
- (For the CE12800E configured with ED-E, EG-E, and EGA-E series cards) Run the display system tcam match-rules slot slot-id chip chip-id index index-id command to display matched entries.
