No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Traffic Statistics on a VPLS PW

Checking Traffic Statistics on a VPLS PW

Context

NOTE:

Within five minutes, if a PW goes Down, traffic before the PW is Down cannot be used to compute the traffic rate in the five minutes.

After the traffic statistics function is enabled on a VPLS PW, you can run the following commands in any view to view the running status of traffic on the VPLS PW.

Procedure

  • Run the display vpls traffic-statistics vsi vsi-name peer peer-address command to check the public traffic statistics on a VPLS PW in a specified VSI.
  • Run the display vpls traffic-statistics vsi vsi-name peer peer-address negotiation-vc-id vc-id command to check the public traffic statistics on a Martini VPLS PW in a specified VSI.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14416

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next