No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the VLL Traffic Statistics Collection Function

Enabling the VLL Traffic Statistics Collection Function

Context

You can collect statistics on VLL traffic on the user-side interfaces that are bound to the VLL. To do this, enable the VLL traffic statistics collection function before the VLL connection is set up.

Procedure

  1. Run the system-view command to enter the system view.

  2. Run interface vlanif vlan-id or interface interface-type interface-number.subnum mode l2 command to enter the VLANIF interface view or Layer 2 sub-interface view.

  3. Run the mpls l2vpn pw traffic-statistics enable command to enable traffic statistics collection on a VLL PW.

    By default, traffic statistics collection is disabled on a PW.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14455

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next