No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of BGP/MPLS IP VPN

Monitoring the Running Status of BGP/MPLS IP VPN

Context

During routine maintenance, you can run the following commands in any view to check the running status of the BGP/MPLS IP VPN.

Procedure

  • Run the display ip vpn-instance [ verbose ] [ vpn-instance-name ] command to check information about the VPN instance.
  • Run the display default-parameter l3vpn command to check the default L3VPN configuration during initialization.
  • Run the display ip routing-table vpn-instance vpn-instance-name command to check the IP routing table of a VPN instance.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } routing-table [ statistics ] label command to check information about labeled routes in the BGP routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table ipv4-address [ mask | mask-length ] command to check information about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table statistics command to check statistics about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table command to check information about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } group [ group-name ] command to check information about the BGP VPNv4 peer group.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } peer [ [ ipv4-address ] verbose ] command to check BGP VPNv4 peer information.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } network command to check the VPNv4 routing information advertised by BGP.
  • Run the display bgp vpnv4 vpn-instance vpn-instance-name peer { group-name | ipv4-address } log-info command to check the BGP peer's log information of a specified VPN instance.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 16426

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next