No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MAC Address Learning

Configuring MAC Address Learning


In VPLS, packets are forwarded according to MAC address forwarding entries. In most cases, MAC address learning can be performed automatically. Nevertheless, to prevent attacks and troubleshoot faults, you can adopt the VSI-based MAC address management mechanism provided by the switch.


  1. Run system-view

    The system view is displayed.

  2. Run mac-address aging-time aging-time

    The aging time of MAC address entries for the VPLS is configured.

  3. Run mac-address static mac-address interface-type interface-number vlanif interface-number vsi vsi-name

    Static MAC address entries are configured.

  4. Run mac-address blackhole mac-address vsi vsi-name

    MAC address blackhole entries are configured.

  5. Run vsi vsi-name [ static ]

    The VSI view is displayed.

  6. Run pwsignal ldp

    The PW signaling protocol is specified as LDP and the VSI-LDP view is displayed.

  7. Run vsi-id vsi-id

    The VSI ID is configured.

  8. Run quit

    Return to the VSI view.

  9. Run mac-learning { enable | disable }

    The MAC address learning is enabled or disabled.

  10. Run commit

    The configuration is committed.

Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14229

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next