No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VPNv6 GR Helper

Configuring VPNv6 GR Helper

Context

On VPNv6 networks, you can configure neighboring devices of the Graceful Restart (GR) restarter as VPNv6 GR helpers. This ensures uninterrupted forwarding of VPNv6 traffic when an active/standby switchover occurs on any of the CE, PE, and P devices.

The GR process involves two roles: GR restarter and GR helper.
  • GR restarter: performs active/standby switchover or system upgrade.
  • GR helper: helps the GR restarter to implement uninterrupted service forwarding.

VPNv6 GR leverages the GR capabilities of various protocols running on devices on VPNv6 networks. On neighboring devices of the GR restarter, configure IGP GR helper, MPLS LDP GR helper, or BGP GR helper based on the related protocol running on the GR restarter.

Configure VPNv6 GR on the PE, CE, and P as follows:
  • Configure IGP GR helper, MPLS LDP GR helper, or BGP GR helper on the PE device.
  • Configure MPLS LDP GR helper or IGP GR helper on the P device.
  • Configure IGP GR helper or BGP GR helper on the CE device.
  • If a VPNv6 spans multiple ASs, you must configure IGP GR helper, MPLS LDP GR helper, or BGP GR helper on the ASBR.

Pre-configuration Tasks

Before configuring VPNv6 GR helper, complete the following tasks:

Procedure

  • Configure IS-IS GR helper or OSPF GR helper.

    • IS-IS GR helper is enabled on a device by default.
    • For details about how to configure OSPF GR helper, see Configuring OSPF GR Helper in CloudEngine 12800 and 12800E Series Switches Configuration Guide - IP Routing.
    • For details about how to configure OSPFv3 GR helper, see Configuring the OSPFv3 GR Helper in CloudEngine 12800 and 12800E Series Switches Configuration Guide - IP Routing.

  • Configure BGP GR helper.

    • For details about how to configure BGP GR helper, see Configuring the BGP GR Helper Function in CloudEngine 12800 and 12800E Series Switches Configuration Guide - IP Routing.

  • Configure MPLS LDP GR helper.

    • For details about how to configure MPLS LDP GR helper, see Configuring LDP GR Helper in CloudEngine 12800 and 12800E Series Switches Configuration Guide - MPLS.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14397

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next