No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of Basic BGP/MPLS IPv6 VPN Configuration Tasks

Summary of Basic BGP/MPLS IPv6 VPN Configuration Tasks

After the basic BGP/MPLS IPv6 VPN configuration is complete, a simple VPN network can be established using the MPLS technology. To deploy specialized BGP/MPLS IPv6 VPN networking, for example, inter-AS VPN, you need to perform other configuration tasks listed in the following table.

Table 3-3 BGP/MPLS IPv6 VPN configuration tasks

Configuration Task



Configure BGP/MPLS IPv6 VPN in various networking modes.


Configure inter-AS IPv6 VPN.

Configuring Inter-AS IPv6 VPN Option A

Configuring Inter-AS IPv6 VPN Option B


Configure BGP/MPLS IPv6 VPN reliability.

Configuring Route Reflection for BGP VPNv6 Routes

Configuring VPNv6 FRR

Configuring FRR for IPv6 Routes on a Private Network

Configuring VPNv6 GR Helper


Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14559

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next