No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Route Reflection to Optimize the VPN Backbone Layer

Verifying the Configuration of Route Reflection to Optimize the VPN Backbone Layer

Prerequisites

The configuration of the route reflection function to optimize the VPN backbone layer is complete.

Procedure

  • Run the display bgp vpnv4 all peer [ [ ipv4-address ] verbose ] command to check information about the BGP VPNv4 peer on the RR or the client PEs. If the status of the MP-IBGP connections between the RR and all client PEs is Established, the configuration is successful.
  • Run the display bgp vpnv4 all routing-table peer ipv4-address { advertised-routes | received-routes } command or display bgp vpnv4 all routing-table statistics command to check information about the routes received from the peer or the routes advertised to the peer on the RR or the client PEs. If the RR and each client PE can send and receive VPNv4 routing information between each other, the configuration is successful.
  • Run the display bgp vpnv4 all group [ group-name ] command to check information about the VPNv4 peer group on the RR. If the status of the BGP connections between the peer members and between the RR and the group members is Established, the configuration is successful.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 16473

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next