No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for VPLS

Default Settings for VPLS

Table 6-8 Default settings for VPLS
Parameter Default Setting
Maximum Transmission Unit (MTU) value in the VSI view 1500
LDP MAC Withdraw message sent by the VSI Disabled
Encapsulation type of an interface in the VSI view VLAN
MAC address learning of a VSI Enabled
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 16600

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next