No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Relationship Between PWE3 and L2VPN

Relationship Between PWE3 and L2VPN

PWE3 is a set of point-to-point (P2P) Layer 2 Virtual Private Network (L2VPN) technologies. Martini L2VPN is only one of the PWE3 technologies. PWE3 uses some Martini L2VPN techniques, including Label Distribution Protocol (LDP) signaling and encapsulation modes. In addition, PWE3 extends the Martini L2VPN.

PWE3 is extended Martini and has the same signaling process as Martini.

PWE3 advertises the PW status using LDP signaling Notification messages. A PW is torn down only when PW configurations are deleted or the LDP session is interrupted. PWE3 reduces control packets exchanged between provider edges (PEs) and signaling costs. LDP signaling used by PWE3 is compatible with common LDP and Martini.

Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14446

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next