No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of IPv4 Route Import Between Instances

Verifying the Configuration of IPv4 Route Import Between Instances

Prerequisites

The configuration of IPv4 route import between instances is complete.

Procedure

  • Run the display ip routing-table vpn-instance vpn-instance-name command to check IPv4 routes imported to a specified VPN instance.
  • Run the display ip routing-table command to check IPv4 public network routes.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } routing-table ipv4-address [ mask | mask-length ] command to check IPv4 VPN BGP routes.
  • Run the display bgp routing-table ipv4-address [ mask | mask-length ] command to check IPv4 public network BGP routes.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14609

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next