No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking L3VPN Traffic

Checking L3VPN Traffic

Context

Run the following command to display traffic statistics on the interface at the user side of the VPN. Note that traffic statistics are collected only after the L3VPN traffic statistics collection function is enabled.

Procedure

  • Run the display traffic-statistics vpn-instance vpn-instance-name command to check the statistics about L3VPN traffic of a specified VPN instance.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14155

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next