No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Related Parameters for a VSI

Setting Related Parameters for a VSI

Pre-configuration Tasks

Before setting VSI-related parameters, complete the following tasks:

Configuration Procedure

After creating a VSI and assigning a signaling protocol to it, you can set common parameters of the VSI. According to different applicable environments, you can determine whether to modify the MAC address learning mode and MAC address entry.

Perform the following configurations on the PE.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14414

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next