No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the LDP VPLS Configuration

Verifying the LDP VPLS Configuration

Prerequisites

All LDP VPLS configurations are complete.

Procedure

  • Run the display vpls vsi [ name vsi-name ] [ verbose ] command to check information about a VPLS VSI.
  • Run the display vpls remote ldp [ [ router-id ip-address ] [ pw-id pw-id ] | unmatch | verbose ] command to check information about a remote VSI.
  • Run the display vpls services { all | vsi vsi-name | interface interface-type interface-number | vlan vlan-id } command to check information about the AC interface associated with the VSI.
  • Run the display vpls vsi { name vsi-name peer-info [ peer-ip-address ] | peer-info } or display vpls vsi [ name vsi-name ] peer-info statistics command to check the PW status information of VSI peers.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 16476

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next