No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Traffic Suppression in a VSI

Configuring Traffic Suppression in a VSI


You can configure traffic suppression in a VSI to limit the rate of incoming broadcast packets, multicast packets, and unknown unicast packets, and prevent broadcast storms.


  1. Run system-view

    The system view is displayed.

  2. Run vsi vsi-name [ static ]

    The VSI view is displayed.

  3. Run { storm suppression broadcast | storm suppression multicast | storm suppression unknown-unicast } cir cir-value [ gbps | mbps | kbps ] [ cbs cbs-value [ byte | mbyte | kbyte ] ]

    Traffic suppression is configured in the VSI.

  4. Run commit

    The configuration is committed.

Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14188

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next