No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the RR to Establish MP IBGP Connections with the Client PEs

Configuring the RR to Establish MP IBGP Connections with the Client PEs

Context

Choose one of the following methods to configure the RR.

Procedure

  • Configuring the RR to establish MP-IBGP connections with the peer group

    Add all the client PEs to the peer group and establish MP-IBGP connections with the peer group.

    1. Run system-view

      The system view is displayed.

    2. Run bgp { as-number-plain | as-number-dot }

      The BGP view is displayed.

    3. Run group group-name [ internal ]

      An IBGP peer group is created.

    4. Run peer group-name connect-interface interface-type interface-number

      The interface for establishing a TCP connection is specified.

    5. Run ipv4-family vpnv4

      The BGP VPNv4 address family view is displayed.

    6. Run peer group-name enable

      The RR is enabled to exchange VPNv4 routes with the peer group.

      By default, the RR can exchange VPNv4 routes with the peer in the BGP IPv4 unicast address family.

    7. Run peer ip-address group group-name

      The peer is added to the peer group.

    8. Run commit

      The configuration is committed.

  • Configuring the RR to establish an MP-IBGP connection with each client PE

    Repeat the following steps on the RR to establish an MP-IBGP connection with each client PE.

    1. Run system-view

      The system view is displayed.

    2. Run bgp { as-number-plain | as-number-dot }

      The BGP view is displayed.

    3. Run peer ipv4-address as-number as-number

      The client PE is specified as the BGP peer.

    4. Run peer ipv4-address connect-interface interface-type interface-number

      The interface for establishing a TCP connection is specified.

    5. Run ipv4-family vpnv4

      The BGP VPNv4 address family view is displayed.

    6. Run peer ipv4-address enable

      The RR is enabled to exchange VPNv4 routes with the client PE.

    7. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 16392

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next