No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting the Keepalive Packet Statistics on a Tunnel Interface

Resetting the Keepalive Packet Statistics on a Tunnel Interface

Context

When you need to calculate and analyze statistics on a tunnel interface, reset the statistics to avoid interference of the original statistics.

After you reset the Keepalive packet statistics on a specified tunnel interface, statistics on the number of Keepalive probes and Keepalive reply packets are cleared.

The cleared Keepalive packet statistics cannot be restored. Exercise caution when you run the command.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface tunnel interface-number

    The tunnel interface view is displayed.

  3. Run reset keepalive packets count

    The Keepalive packet statistics on the tunnel interface is reset.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14563

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next