No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of VPN, including GRE, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, and VPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying Connectivity of a PW

Verifying Connectivity of a PW


Before using the ping vc command to check connectivity of a PW, ensure that the PWE3 network is correctly configured.

VCCV is an end-to-end fault detection and diagnosis mechanism which includes VCCV ping and VCCV tracert. VCCV ping is a tool for manually testing VC connectivity; while VCCV tracert is tool for manually locating an abnormal node on a PW.


  • Run the ping vc pw-type pw-id [ peer-address ] [ -c echo-number | -m time-value | -s data-bytes | -t timeout-value | -exp exp-value | -r reply-mode | -v | -g ] * control-word command to verify connectivity of a PW.
  • Run the tracert vc pw-type pw-id [ peer-address ] [ -exp exp-value | -f first-ttl | -m max-ttl | -r reply-mode | -t timeout-value | -g ] * control-word [ full-lsp-path ] [ detail ] command to locate the fault on a PW.
Updated: 2019-04-03

Document ID: EDOC1100075353

Views: 14398

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next