Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Network Management Function for RIP
Pre-configuration Tasks
Before configuring
the network management function for RIP, complete the following task:
Procedure
- Run system-view
The system view is displayed.
- Run rip mib-binding process-id
RIP is bound to the MIB.
This command is used to bind a RIP process ID to MIBs and specify the ID of the RIP process that accepts Simple Network Management Protocol (SNMP) requests.
- Run commit
The configuration is committed.