No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
CloudEngine 12800 and 12800E V200R005C10 Configuration Guide - IP Unicast Routing
This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic RIPng Function Configuration
Verifying the Basic RIPng Function Configuration
Procedure
Run the display ripng [ process-id | vpn-instancevpn-instance-name ] command to check the configuration of the RIPng process.
Run the display ripngprocess-idroute [ destination-addressdestination-address [ mask-length ] ] [ interfaceinterface-typeinterface-number ] [ neighbor-addressneighbor-address ] command to check all the RIPng routes that are learned from other switches.
Run the display default-parameter ripng command to check the default RIPng configuration.
Run the display ripngprocess-idstatisticsinterface { all | interface-type interface-number [ neighborneighbor-ipv6-address | verbose ] } command to check statistics about RIPng interfaces.